Subscribe to EDN

EDN Product fEEd

RSS

EDN's technical editors highlight notable new products including analog and digital ICs, power components, sensors, passives, boards and systems, software, and more.

My Yahoo
Recent Posts
Recent Comments
Most Commented On
Archives

IXYS-Clare CPC1540 solid-state relay: Solid-state relay features thermal shutdown

EDN Staff
Posted by EDN Staff on February 24, 2012

The 350V, current-limiting, normally open CPC1540 solid-state relay replaces electromechanical devices and enhances system robustness. The optically isolated device improves survivability in harsh environments and is designed to pass regulatory voltage-surge requirements when provided with overvoltage protection. Targeting use in environmentally demanding ac or dc applications with limited PCB spa ...... Read More

Comments (0)

NKK Switches YB2 pushbutton switches: Devices have short above-panel dimension

EDN Staff
Posted by EDN Staff on February 23, 2012

The YB2 series of 24-mm², flush-mount, tamperproof-panel-seal pushbutton switches complies with IP65 standards and targets use in applications requiring a low-profile, secure, and splashproof design. Available in illuminated and nonilluminated models, the switches feature an 18-mm²- diameter actuator and a 1.8-mm above-panel dimension. The switches offer a dust-tight, splashproof panel s ...... Read More

Comments (0)

E-Switch KJD17 pushbutton switch: Heavy-duty series of switches offer safety protection

EDN Staff
Posted by EDN Staff on February 22, 2012

The heavy-duty KJD17 series of pushbutton switches offers an industrial design and a PVC cap for dust and water protection, equivalent to an IP54 rating. The switch incorporates an electromagnet that provides automatic safety protection against power outages and restarts. The 2-hp, 16A, UL-listed switch also features a life expectancy of 10,000 cycles and a contact rating of 16A at 12V ac, 16A at ...... Read More

Comments (0)

C&K Components RB-4G0124 and RB-231 switches: Rolling-ball tilt switches control safety

EDN Staff
Posted by EDN Staff on February 21, 2012

The RB-4G0124 and RB-231 series of rolling-ball tilt switches feature a funnel-shaped design for high accuracy and 360° detection. Targeting use in safety-control applications, such as irons, portable heaters, toys, and handheld devices, the RB-4G0124 switch features an infrared LED and a phototransistor to precisely detect the control signal. The tilt switch provides an electrical life of 1 ...... Read More

Comments (2)

Knitter-Switch MMP/MMS 1263 switches: Switches feature automatic-return slider

EDN Staff
Posted by EDN Staff on February 20, 2012

The MMP/MMS 1263 series microminiature slide switches operate as on/off switches for personal multimedia products, musical instruments, and other applications requiring small switches. The one-pole, two-position switches have side- or top-actuated sliders with a latching or rest position on the right or the left of the switch. Each switch has a return force of 1 or 3.5N. The units measure 8.85 mm ...... Read More

Comments (0)

AVX StaticGuard varistors: Automotive varistors have low leakage current

EDN Staff
Posted by EDN Staff on February 17, 2012

The AEC Q200-qualified automotive StaticGuard series varistors deliver capacitance of 40 to 200 pF at 0.5V and leakage current of 10 μA, providing ESD protection in CMOS, bipolar, and SiGe-based circuits. The varistors provide bidirectional transient-voltage protection in the on state and EMI/RFI attenuation in the off state, along with an ESD rating as high as 15 kV. The devices come in 040 ...... Read More

Comments (0)

Vishay VJ CDC: Surface-mount MLCC features integrated resistor

EDN Staff
Posted by EDN Staff on February 16, 2012

The VJ CDC (controlled-discharge capacitor) offers voltage ratings from 1000 to 1500V dc and finds use in high-pulse-current applications, including detonation devices and electronics fuzing. The integration of a high-capacitance MLCC (multilayer-ceramic-chip capacitor) with a bleed resistor on its surface allows the VJ CDC to discharge rapidly while also reducing board-space requirements. Capacit ...... Read More

Comments (0)

Tecate Group MXCPB and MXCPT capacitors: Hybrid-construction capacitors feature low ESR

EDN Staff
Posted by EDN Staff on February 15, 2012

The MXCPB and MXCPT series of aluminum-polymer hybrid-construction capacitors feature operating load-life ratings as high as 2000 hours. The MXCPB series is available with a capacitance value of 22 to 560 μF and voltage options of 6.3, 10, and 16V dc. The devices come in 8×10.5- and 10×10.5-mm cases and operate at −55 to +125°C. Load life is 2000 hours at 125°C. Ca ...... Read More

Comments (0)

AVX GX01 capacitor: Ultrabroadband capacitor addresses dc-blocking issues

EDN Staff
Posted by EDN Staff on February 14, 2012

The GX01 ultrabroadband capacitor addresses dc-blocking issues from 160 kHz with a −3-dB rolloff to 40 GHz. The GX01 provides an insertion-loss value of less than 0.5 dB through at least 40 GHz. It features a standard EIA 0201 footprint and is available with X5R or X7S dielectric characteristics. Targeting use in semiconductor-data communications, optical-receiver subassemblies, transimpeda ...... Read More

Comments (1)

Rohm 03015-size chip resistor: Chip resistor measures 0.3×0.15-mm

EDN Staff
Posted by EDN Staff on February 13, 2012

Rohm’s 03015-size chip resistor measures 0.3×0.15 mm and offers dimensional accuracy of ±5 microns. Tolerance range is 10 to 91Ω or 100Ω to 1 MΩ, and resistance-temperature characteristics are ±300 or ±250 ppm/°C. Operating temperature is −55 to +125°C. Rohm Corp, www.rohm.com ...... Read More

Comments (0)

Kemet T522 polymer capacitors: Capacitor series features low leakage

EDN Staff
Posted by EDN Staff on February 10, 2012

The T522 polymer-tantalum capacitor series targets leakage-sensitive applications, such as battery-supported circuits. The devices feature an ESR of 25 to 40 mΩ, capacitance of 150 to 470 μF, voltage as high as 6.3V dc, and an operating temperature of −55 to +105°C. Other features include a nonignition failure mode, 100% accelerated steady-state aging, and a self-healing me ...... Read More

Comments (0)

Vishay IHLP-3232CZ-11 inductor: Inductor has a 3-mm profile

EDN Staff
Posted by EDN Staff on February 9, 2012

The 3232-size IHLP-3232CZ-11 inductor measures 8.26×8.79 mm and has a 3-mm profile. Maximum dc resistance ranges from 1.62 to 205 mΩ, and standard inductance values range from 0.22 to 33 μH. The device also features a saturation current of 2.5 to 24A, a heat-rating current of 2.6 to 36A, and an operating-temperature range of −55 to +125°C. The ROHS-packaged device sell ...... Read More

Comments (0)
Next ›
Advertisement

Datasheets.com Electronic Parts & Inventory Search

185 million searchable parts
  • Part Number
  • Description
  • Inventory
  • Products
  • Manufacturers
Advertisement
Advertisement
About EDN   |   Site Map   |   Contact Us   |   Subscription   |   RSS
© 2012 UBM Electronics. All rights reserved.
Use of this Web site is subject to its Terms of Use | Privacy Policy

Please visit these other UBM Canon sites

UBM Canon | Design News | Test & Measurement World | Packaging Digest | EDN | Qmed | Pharmalive | Appliance Magazine | Plastics Today | Powder Bulk Solids | Canon Trade Shows