| FIGURE 1 |
 |
|
You can program the current that drives the ICCFL-control pin of the LT118X ICs from 0 to 50 µA by applying a PWM signal via a pair of resistors and a 2.2-µF capacitor.
|
back |
| FIGURE 1 |
|
|
You can program the current that drives the ICCFL-control pin of the LT118X ICs from 0 to 50 µA by applying a PWM signal via a pair of resistors and a 2.2-µF capacitor.
|
back |