| FIGURE 1 |
 |
| This simple PC printer-port interface programmer uses the eight data-port lines (pins 2 to 9) and three control-port lines (pins 1, 14, and 16) to program an Atmel AT89C51 flash-based mC. |
back |
| FIGURE 1 |
|
| This simple PC printer-port interface programmer uses the eight data-port lines (pins 2 to 9) and three control-port lines (pins 1, 14, and 16) to program an Atmel AT89C51 flash-based mC. |
back |