Technical Editor Margery Conner's PowerSource streams the latest developments in electronic power design and related technologies. Follow Margery on Twitter at: http://twitter.com/margeryc.
Advertisement
Profile
RSS Feed
-
Add this blog to your RSS newsreader!
Recent Posts
- Why LED replacement bulbs for incandescents (may) need isolation
- Ceramic caps promise long lifetimes for smaller LED lights
- More on The Internet of Things: It may appeal to you if you’re a visionary or a systems company
- HP announces sensors for its “Central Nervous System for the Earth” (CeNSE)
- Power supplies for new LED applications fit in higher-margin markets
- Yes, you can trademark a color
- Pressure film gives snapshot of manufacturing process
- 2010 “Designing with LEDs” Workshop: Call for Papers
- Here’s a list of micro-inverter companies (and some proposed new installations)
- Solar micro-inverter addresses capacitor reliability issues
Recent Comments
- Pete - Visual Interactive Ltd on Why LED replacement bulbs for incandescents (may) need isolation
- John Lazzaro on Why LED replacement bulbs for incandescents (may) need isolation
- Al Grasso on Why LED replacement bulbs for incandescents (may) need isolation
- Snurhoons on Researchers develop OLEDs with color temp spectrum of sunlight
- toocooLEDs on Why LED replacement bulbs for incandescents (may) need isolation
Most Commented On
- This was not the right application for a compact fluorescent light (101)
- Utilities suffer from CFLs’ poor power factor (90)
- Not so easy to run an LED ”bulb” off of a dimmer switch – but here’s how (74)
- Proposed ban by China of rare-earth metal exports would affect hybrid cars, CFLs (67)
- Why diesel is so expensive (57)
Archives
- November 2009
- October 2009
- September 2009
- August 2009
- July 2009
- June 2009
- May 2009
- April 2009
- March 2009
- February 2009
- January 2009
- December 2008
- November 2008
- October 2008
- September 2008
- August 2008
- July 2008
- June 2008
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
- December 2007
- November 2007
- October 2007
- September 2007
- August 2007
- July 2007
- June 2007
- May 2007
- April 2007
- March 2007
- February 2007
- January 2007
- October 2006
- September 2006
- August 2006
- July 2006
- June 2006
By Category
- AC-DC (1)
- Aerospace & Defense (7)
- Analog (2)
- Analog Circuit Design (1)
- Automotive (33)
- Automotive (2)
- Battery Power (44)
- Body Electronics (1)
- Business and Marketing (5)
- Capacitor (2)
- Communication functions (2)
- Communications & Networking (7)
- Components, Hardware, Interconnect (81)
- Computers (2)
- Computers, boards, buses (2)
- Consumer Products (1)
- Convergence (1)
- DC-DC (1)
- Digital ICs (1)
- Discrete Components, Active (2)
- Discrete Components, Passive (2)
- Displays & Indicators (5)
- Displays and indicators (25)
- DSP Engineering (1)
- EDA (1)
- Electromechanical & Mechanical (1)
- Electronic Accessories (2)
- Electronics Business (1)
- Electronics Components (9)
- Electronics Environmental Issues (2)
- Electrostatic Discharge (ESD) (1)
- Embedded Systems (3)
- EMI (1)
- Enclosures (1)
- Environmental Compliance (1)
- Global Supply and Trade (1)
- Government/regulation (3)
- HBLED (12)
- Heat Dissipation (1)
- Hybrid & Green Cars (1)
- LED (35)
- Low Power (1)
- Low-Power (2)
- Manufacturing Operations (1)
- Medical Electronics (3)
- Mergers and Acquisitions (1)
- Motors (1)
- OLED (1)
- Passive components (2)
- Piezoelectric Crystal (4)
- Point-of-Load (1)
- Power components (3)
- Power Consumption (4)
- Power Management (1)
- Power Sources/Controllers (308)
- Power supplies (16)
- Power Supplies (71)
- Powertrain (1)
- Printed Circuit Boards (1)
- Robotics (1)
- Sensors (10)
- Solar/Photovoltaics (17)
- Supply Types (1)
- System Engineering (1)
- Technical Standards (1)
- Transformer (1)
- Transistors (3)
- Venture Capital & IPOs (1)
- Wireless (1)
- Wireless Networks (1)
Power Management Articles
- What every designer should know about magnetics in switch-mode power supplies
- China’s proposed ban of rare-earth metals would affect hybrid cars, CFLs
- Secondary-side synchronous rectification boosts resonant converter efficiency
- EDN on Power Technology: Industry standards lead push toward energy-efficient computing
- New power-supply efficiency numbers herald a new era in power management
- More...
Blog
Monday, August 10, 2009
Demo: Soldering an HB LED to its aluminum substrate/heatsink with a heat gun
Aug 10 2009 9:43AM | Permalink |Comments (2) |
Here’s a nice video from Steve Dahl of Digikey showing how you can use a heat gun to solder high-brightness LEDs to an aluminum substrate heat sink. In the demo he uses a Steinel programmable heat gun set at 620°F (these sell for about $300), and dabs on the solder paste with a needle/syringe applicator. After applying the heat and showing how some of the solder blobs out, he flicks the excess solder off, leaving a very clean-looking joint. (He also emphasizes that this is not following any LED manufacturer’s spec, and is for lab/prototyping purposes only.)
If you like hands-on demos of LED technology and applications, plan to attend EDN’s next Designing with LEDs Workshop in the Chicago area on October 6, which, by the way, you can now register for. We had some great papers and panel discussion at our inaugural event last April which we’ll be building on for the Chicago Workshop.
[Via Adafruit.]
Related entries in: Components, Hardware, Interconnect | LED | Power Sources/Controllers |
Reader Comments
at 8/10/2009 11:51:19 PM, Mare said:
I suggesgt using some tools for placing the LED to avoid touching the lens with your fingers.
at 8/11/2009 4:41:03 PM, William Ketel said:
I can certainly see why there are all of the disclaimers! BUT it looks like it works, and if it really is that quick, then it is a neat trick. I would like to see some of the other units soldered.
Post a comment
About Us | Contact Us | Free Email Newsletters | Free Magazine Subscription | Advertising | 
RSS
©1997-2009 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.
Use of this Web site is subject to its Terms of Use | Privacy Policy