The EMC Blog

- January 31, 2014

Arturo Mediano is a professor at University of Zaragoza (Spain) and founder of The HF-Magic Lab®, a specialized laboratory for design, diagnostic, troubleshooting, and training in the EMI/EMC/SI and RF fields. He is also an instructor for Besser Associates (CA, USA) offering public and on site courses in EMI/EMC/SI/RF subjects. In The EMC Blog, he'll provide interesting and useful information about EMI and EMC, including real-world circuits, waveforms, and design/troubleshooting techniques, interesting tools and instruments on the market, as well as EMI/EMC conferences and symposia around the world.


RSS

Review: Tekbox LISNs

  • 11.28.2015

Tekbox Digital Solutions recently introduced LISN models for both line-operated and DC-operated equipment. I’ll be reviewing their model TBLC08 (line-powered 50uH LISN) and model TBOH01 (DC 5uH LISN).Read More...

Review: Tekbox Near-Field Probes

  • 11.12.2015

A set of near-field probes is an essential tool for troubleshooting EMI issues. Tekbox Digital Solutions has recently introduced a kit containing a set of three H-field, one E-field probe, and either a 20 or 40 dB gain broadband preamplifier. All this is included in a laser-engraved wooden box - a very nice touch. The probes may also be ordered without the preamplifier. I had a chance to try them out and compare with some similar probes.Read More...

(4)

Measuring VSWR with the Rigol DSA815

  • 10.25.2015

Voltage standing wave ratio is a measurement of the impedance match of any RF component, sub-assembly instrument in reference to a standard 50-Ohm resistive impedance. This article discusses how to use the Rigol DSA815 to make this measurement. Read More...

(5)

Review: Test Probes, Inc. (TPI) connector adapter kit

  • 10.12.2015

How many times have you gone to reach for a particular coaxial adapter and failed to find the right one? Test Probes, Inc., now Test Products International (TPI) has two coaxial connector adapter kits and one of my colleagues traded an extra Model TPI 3000A kit for something I had that he needed. I’d like to describe this remarkable adapter kit. Read More...

Review: Picotest J2150A harmonic comb generator

  • 10.08.2015

Picotest has just introduced a very unique harmonic comb generator (Picotest calls it a harmonic injector) that’s not only designed to reveal resonances in power supply and voltage bus designs (power integrity), but also has interesting uses in EMC measurement and troubleshooting. It also has several unique features that really set it apart from all other comb generators.Read More...

(8)

Review: Seikoh Giken optically-coupled E-field probe

  • 09.22.2015

The Siekoh Giken OEFS (Optical Electric Field Sensor) optically-coupled E-field probe is a very unique instrument. The company has developed a technology whereby the amplitude and frequency information from E-fields may be captured and transferred via optical fiber and reconverted to an RF signal. The optical fiber allows E-field measurements to be made non-invasively.Read More...

Aaronia GPS Logger DF antenna

  • 08.24.2015

As mobile communications devices proliferate, the chance for interference to these systems, as well as to television, broadcast radio, and other communication systems increases. One important aspect of EMC is tracking down these interfering signals.Read More...

(1)

Refurbishing the KeyTek MiniZap

  • 08.21.2015

One of the more popular older ESD simulators was the KeyTek MiniZap. While rugged and easy to use, there are two common failures for this model - the NiCad batteries eventually won’t hold a charge and the two variable knobs at the top tend to crack. The knobs are easy to replace with standard set-screw knobs. This article describes how to replace the existing NiCad AA cells with new ones.Read More...

(3)

Review: Signal Hound VSG25A vector signal generator

  • 07.23.2015

Suddenly, we seem to have a plethora of low-cost RF signal generators available for the RF experimenter and EMC engineer. Signal Hound has really raised the bar on these instruments with their new VSG25A vector signal generator, introduced recently at the International Microwave Symposium in Phoenix last May. I was able to get my hands on one to try out for potential EMC test applications.Read More...

GaN technology and the potential for EMI

  • 07.05.2015

While attending DesignCon 2015 last January, I had the chance to hear an interesting keynote presentation by Alex Lidow, CEO of Efficient Power Conversion, Inc., speak on the upcoming development in gallium nitride (GaN) technology for high-power switching devices. Because these devices switch at sub-picosecond speeds, there are EMI ramifications. This article evaluates a simple half-bridge DC-DC converter using GaN switching.Read More...

(7)

Loading comments...

Write a Comment

To comment please Log In

FEATURED RESOURCES