datasheets.com EBN.com EDN.com EETimes.com Embedded.com PlanetAnalog.com TechOnline.com   UBM Tech
UBM Tech

24W, Level V efficiency, LED driver powers high-brightness home lighting

December 05, 2012

Phihong’s new LED driver is the 24W LED driver adapter for residential lighting applications, including under-counter lighting and high-brightness floor and table lamps. Designated the PDA024A-S, the Class 2 adapter is available in 700, 1000 and 1500mA outputs at the North American nominal input voltage range 110-120VAC.

External LED driver adapters significantly reduce the amount of heat produced in an enclosure by completely eliminating the driver circuitry from lighting fixtures, which also allows OEMs to use brighter and higher power LEDs at greater efficiencies

PDA024A-S LED driver adapters are designated as Class 2 outputs per UL1310 and UL8750, have a no load power draw of 0.15W and meet the requirements for Level V efficiency marking. In addition to power factor correction of 0.9, standard features include input over-current, output over-voltage, short-circuit and open-circuit protection. 90VAC to 132VAC wall plug input.

Rated IP20 for dry indoor environments, the PDA024A-S LED driver adapters measure 90.5mm x 55.5mm x 38mm and weigh 125g. The adapters also feature a 1.5-meter DC cord terminated with a 2.1mm x 5.5mm center positive barrel connector.

The PDA024A-S constant-current LED driver adapter

Phihong also offers wireless control capabilities for fluorescent ballasts shown here

 

Pricing for the PDA024A-S series starts at $19.62 in single unit quantities. For more specific information, including the individual product datasheet, please visit www.phihong.com/LED

Loading comments...

Write a Comment

To comment please Log In

DesignCon App
FEATURED RESOURCES