Advertisement
Advertisement
KNOWLEDGE CENTER
Datasheets.com Parts Search
185 million searchable parts
(please enter a part number or hit search to begin)
Advertisement
|
1 - 10 of about 3537 results Power: a significant challenge in EDA designArticle Source: EDN | Date: 2012-05-24T07:00:00Z ... to show improvement
in power consumption. For example,
the Samsung 28-nm low-power
process delivers 35% less active and
standby power at the same frequency
than the company’s 45-nm low-power
process, and the 28-nm process offers a
60%-of-active-power reduction at the
same frequency compared with 45-nm
low-power system-on-chip designs.
Taiwan Semiconductor Manufacturing
Co’s 28-nm high-performance, low...http://www.edn.com/article/521840-Power_a_significant_challenge_in_EDA_design.php USB 3.0 bringing superspeed connectivity to mobile devicesArticle Source: EDN | Date: 2012-05-24T07:00:00Z ....0 microconnector that enables
faster content data transfer, rapid battery
charging, and high-definition video
streaming over MHL.Extended throughputStorage in most mobile devices employs
either SD (secure-digital...http://www.edn.com/article/521851-USB_3_0_bringing_superspeed_connectivity_to_mobile_devices.php Handling time delaysArticle Source: EDN | Date: 2012-05-24T07:00:00Z ... of
a feedback-control system?Time delays arise in control systems from delays in the
process itself, represented by a time constant, τ, and a natural
frequency, ωN, in transfer functions; from delays in the processing
of sensed signals; and from delays in the implementation
of a digital-control system as a result of sample-and-hold,
calculation, and velocity estimation, in which the total time delay can be one to two times the
sample period.The input-output time delay
shifts the signal in time (Figure 1).
The frequency response of a time
delay is exact, with a magnitude of
one and a phase angle that decreases...http://www.edn.com/article/521888-Handling_time_delays.php 10 measurements defining signal integrityArticle Source: EDN | Date: 2012-05-10T07:00:00Z ...The following 10 measurements define signal integrity. Master
them, and you will become a guru of the art. Work on one
measurement every quarter or every year until you fully
grasp the relationship...http://www.edn.com/article/521734-10_measurements_defining_signal_integrity.php Build a digital PLL with three ICsArticle Source: EDN | Date: 2012-05-10T07:00:00Z ...The simple circuit in this Design
Idea exhibits the basic characteristics
of a traditional analog phase-locked
loop but has no analog components
other than the reference oscillator.
Other digital...http://www.edn.com/article/521757-Build_a_digital_PLL_with_three_ICs.php Baolab plans monolithic inertial MEMSArticle Source: EDN | Date: 2012-05-08T16:19:59Z ... using its back-end CMOS process.The combination of tri-axis accelerometers, gyroscopes and magnetometers can provide absolute position and orientation information. Often used in conjunction with satellite...http://www.edn.com/article/521732-Baolab_plans_monolithic_inertial_MEMS.php High-performance HF transceiver design: A ham's perspectiveArticle Source: EDN | Date: 2012-05-03T20:35:44Z ... analog receiver imperfections, but requires a PC and software for signal demodulation.
The DDC, implemented in an FPGA, includes a numerically-controlled local oscillator (all-digital) and a quadrature...http://www.edn.com/article/521690-High_performance_HF_transceiver_design_A_ham_s_perspective.php PCB and ESR subtleties in switching regulator and LDO designsArticle Source: EDN | Date: 2012-04-27T17:31:13Z ... to counter ripple and noise signals riding on VOUT. With reduced noise signal on the output, the feedback resistors scale the DC output without the AC component. This eliminates an error term, which improves...http://www.edn.com/article/521618-PCB_and_ESR_subtleties_in_switching_regulator_and_LDO_designs.php An introduction to capacitive sensing, part 1Article Source: EDN | Date: 2012-04-24T13:40:26Z ... capacitanceSurface capacitance
In this technology, glass is uniformly coated with a conductive layer. During operation, a voltage signal is applied to all four corners of the panel, resulting in a uniform...http://www.edn.com/article/521583-An_introduction_to_capacitive_sensing_part_1.php Sensor architecture allows real-time auto emissions monitoring, Part 1Article Source: EDN | Date: 2012-04-17T15:10:05Z ... the real-time information.Converting analog data to digital formatTo enable the sensors' data to be processed by the MCUs, one needs to convert this data into digital format. ADCs (analog-to-digital converters) can be used to convert the sensors' output into digital format, making it easier for the processing unit to store and process it.Given the type of application, one would not require constant...http://www.edn.com/article/521516-Sensor_architecture_allows_real_time_auto_emissions_monitoring_Part_1.php 1 - 10 of about 3537 results 1 2 3 4 5 > |
Advertisement
