Green doesn't only impact those with eco-friendly or socially-responsible product ambitions, or that must comply with regulations like RoHS, WEEE, REACH and EuP. Learn about the impact of environmental performance on product lifecycles from a panel of experts led by the authors of "Benchmarking Green", Rory King and Andrew K. Reese. Register now!

The AFE5805EVM allows convenient evaluation of the AFE5805. The AFE5805 is a fully integrated analog front-end device featuring 0.85 nV/rt Hz at 40 MSPS at 122 mW/channel. It consists of 8 channels and offers best-in-class noise performance while maintaining low power for use in mid-range to portable ultrasound equipment.

The AFE5804EVM allows convenient evaluation of the AFE5804. The AFE5804 is a fully integrated analog front-end device featuring 101 mW/channel at 1.23 nV/rtHz at 40 MSPS. It consists of 8 channels and offers best-in-class power performance while maintaining superior image quality for use in portable ultrasound equipment.

Reliable and simple wireless solutions are no longer mutually exclusive. Learn about embedded wireless design challenges and tools needed to overcome them. CyFi™ is a low-power RF solution that enables you to deploy a reliable, simple, power-efficient sense and control application quickly and easily. Register now!

Touch-sensing is changing the way humans interact with products such as cell phones, PCs, consumer electronics, white goods, and automotive systems. Learn design best practices that are critical to adding elegant capacitive touch-sensing interfaces - touch-sensing buttons, sliders, touchpads - in this live video webcast with Q&A. Register now!

The TPS54386EVM is a dual non-synchronous buck converter providing fixed 5- and 3.3-V output at up to 2A each from a 12-V input bus. TPS54386EVM is designed to demonstrate the TPS54386 in a typical 12-V bus system while providing a number of test points to evaluate its performance in a given application.

The TPS54231 DC/DC converter is designed to provide up to a 2A output from an input voltage source of 3.5-28V. The TPS54231EVM-372 is designed to demonstrate the small printed-circuit-board areas that may be achieved when designing with the regulator. The switching frequency is internally set at a nominal 570 kHz.

The TPS55383EVM-363 is a dual non-synchronous buck converter providing fixed 5 and 3.3-V output at up to 3A each from a 12-V input bus. The EVM is designed to start up from a single supply, so no additional bias voltage is required and it uses a regulated 12-V (+10% /-20%) bus to produce two regulated power rails.

The TPS54160EVM-230 helps designers evaluate the operation and performance of the TPS54160 DC/DC converter. TPS54160 is a wide input voltage 3.5 - 60V, 2.5MHz, step down converter capable of 1.5A of output current. The top converter on the EVM is designed to operate from a 42VDC+/- 25% input voltage and the bottom converter from 6 V to 60 V.

The TPS54331 DC/DC converter is designed to provide up to a 3-A output from an input voltage source of 3.5 V to 28 V. The EVM is designed to demonstrate the small printed-circuit-board areas that may be achieved when designing with the TPS54331. The switching frequency is internally set at a nominal 570 kHz and maximum input voltage is 30 V.