800 W converters fit in quarter-brick package

-November 12, 2017

Isolated DC/DC converters in the ADQ800 series from Artesyn are intended for use with 48 V supplies in computing, server, and telecom equipment. These low-profile quarter-brick units are capable of delivering up to 70 A of output current with a single, fully regulated 11.8 V output.

ADQ800 series converters accommodate an input voltage range of 40 V to 60 V and achieve typical efficiency of 96% at full load. Fixed frequency switching at 175 kHz helps minimize external EMI filtering requirements. Additionally, the converters operate over a temperature range of -40° to +85°C and have no minimum load requirement.

Dimensions of the converter open-frame package with baseplate are 2.3×1.45×0.53 in. Other features include output overvoltage, output overcurrent, and overtemperature protection. The devices also offer pre-bias startup, as well as parallel and droop current sharing.

The ADQ800 series DC/DC converters cost $80 each.

ADQ800 series product page

Artesyn Embedded Technologies, www.artesyn.com

Find more datasheets on products like this one at Datasheets.com, searchable by category, part #, description, manufacturer, and more.

Loading comments...

Write a Comment

To comment please Log In

FEATURED RESOURCES